The VIBROSCREEN model SCM-55-C comes equipped with a central discharge conveyor in order to save one (1) operator.

The perfect solution to your high production  year  round scalping and screening needs,  capable of  processing up to 180 cubic yards of material per hour.

VIBROSCREEN SCM-55-C : Heavy-Duty, superior productivity and reliable machine that will maximize your investment.

Following are the specifications of a portable vibrating screen model SCM-55-C used to process topsoil, gravel, stone, concrete, dirt, sand, compost, mulch and other bulk materials.

MATERIAL CAPACITY
Maximum Single Load	Up to 3 yards (loader or excavator)
Cycle Time, Average	30 sec (typical)
Shaker Head Decks	2
Screening area (per deck)	88'' X 90'' (55 square feet)
Top Deck (standard setting)	Side tension -   2 ½" square opening
Bottom Deck (standard setting)	Side tension -  ¾" X 5"  slot
WEIGHT
Gross	26,560 lbs
Tongue	7,460 lbs
TOWING
Hitch type	Fifth wheel
Axle type	Single axle, Double wheels
Suspension	Spring leaves
Brake system	Pneumatic
Tire size	4x 275 / 70R22.5 LRH
FLUID CAPACITIES
Fuel	25 gallons
Hydraulics	40 gallons tank capacity, 25 gal in system
HYDRAULICS
Pump type / Brand	Commercial Intertech - Double pump
Pump displacement	2.46 cu. in. - 2.96 cu. in.
Pump capacity	23 GPM @ 2200 R.P.M.
Shaker motor	Commercial Intertech
Shaker motor displacement	3.94 cu. in.
Conveyor motor	White – 2x Model RE16180400
Conveyor motor displacement	2x 16 cu. in.
System relief pressure	3,000 psi
Oil cooler	400 BTU/min
Filtration	10 microns - nominal
Oil type	Grade ISO 32
ENGINE
Type	4 cylinder - Liquid Cooled
Model	Perkins 404-22 Turbo
ISO Net horsepower @ 2800 R.P.M.	60 BHP
Torque @ 2000 R.P.M.
Fuel type	Diesel
Cold starting aide	Glow Plug
Air filtration	Dry
Oil type	10W30
SPEEDS
Engine (Hi idle)	Hi-Idle 3000, locked at 2200 R.P.M.
Engine (low idle)	800
Shaker shaft (+/- 25 R.P.M.)	1150-1200
ELECTRICAL
Battery type	12 volts
Battery capacity	850 C.C.A.
Alternator	55 AMPS
Starter	2.68 Hp
Engine shut down protection	Oil pressure, Over heat
DIMENSIONAL SPECIFICATIONS
Overall Length (travel)	36'-8''
Transport Height	11'-3"
Overall Width	8'-4"
Hopper Length	10'-0"
Operating Height	9'-10"